Legrand DS4000 Obstacle Avoidance User Manual
Page 6
Advertising
![background image](/files/794622/content/doc006.png)
6
Cover Removal w/650RT
FITTING COVER REMOVAL – Fitting Cover can be removed using two methods:
Cover Removal w/Screwdriver
Step 1. Locate Dimple on Fitting and use as guide to drill
3/16" [5mm] hole for Tamper Resistant Screw.
To make the Fittings fully tamper resistant, use part no. DSTRK.
Step 2. Install Tamper Resistant Screw through drilled hole in the
Cover into the tab with hole on the Fitting Base.
Step 3. Installation complete.
Advertising