Lencore Spectra i.Net: Sound Manager 2.0 - Manual (Page 19)

Audio Settings
The Audio Settings page allows you to configure the following categories for each of the
OP Channels:
o Masking (Attenuation and Contour)
o Paging (Attenuation Only)
o Audio (Attenuation Only)
The options available will be determined by the type of OP (iNet or Emerald) selected
and which tab is currently being edited (iNet OP/Masking tab shown above).
HOTKEYS
Masking Tabs: Press “M”
Paging Tabs: Press “P”
Audio Tabs: Press “A”
Channel Tabs:
Channel A or 1: Press “1’
Channel B or 2: Press “2”
Channel C or 3: Press “3”
Channel D or 4: Press “4”
Channel 5: Press “5”
Channel 6: Press “6”
Channel 7: Press “7”
Channel 8: Press “8”
17