Leprecon APC Architectural Preset Control - Manual (Page 6)

6
Rear panel connections
The rear panel of the APC Hub contains all of the connectors needed to interface
to the lighting system.
1. AC Power Input - IEC inlet with 5 amp fuse. A spare fuse is included in the
fuse drawer in the lower part of the outlet. A locking wire bail can be used to
secure the power cord.
2. DMX Input - 5 Pin XLR Male for connection to the lighting controller or
console.
3. APC Panel connection - RJ45 jack to connect to the wall panels in the system.
4. DMX Output - 5 pin XLR female for connecting to the dimming system and
DMX controlled fixures.