Canon A3000 IS - Manual (Page 95)

95
Checking the Focus
You can magnify the area of a recorded image that was inside the AF
Frame, or the area of a face that was detected, to check the focus.
1
Press the l button, and
switch to the focus check display
(p. 44).
● For images with detected faces, you can
also switch to the focus check display by
pressing the
0 button.
X A white frame will appear where the AF
frame or face was when the focus was set.
X A gray frame will appear on a face detected
during playback.
X The area within the orange frame appears
magnified.
2
Switch frames.
● Press the zoom button toward k once.
X The screen shown to the left will appear.
● Press the 0 button to switch between
frames on detected faces. Press the m
button to move to another frame.
3
Change the magnification level or
location.
● Press the zoom button to change the display
size, and the
opqr buttons to change the
display position while checking the focus.
● Pressing the n button resets the
display to Step 1.
CO
PY