LSC Lighting MDR Splitter - Manual (Page 9)

MDR DMX512/RDM Data Splitter Operator Manual
LSC Lighting Systems (Aust) Pty Ltd. Page 7
MDR DMX512-A/RDM Splitter Specifications
Technical Specifications MDRR MDRX MDRT MDRJ
DMX512-A compatible Yes Yes Yes Yes
5-pin XLR In & Thru connectors Yes Yes Yes No
3-pin XLR In & Thru connectors Optional Optional Optional No
Output XLR configuration 5-way 10-way 5-way N/A
3-pin XLR available on any output
(specify how many at time of order)
Optional Optional Optional N/A
RJ45 Connector Configuration N/A N/A N/A 10-way
Integrated termination switch Yes Yes Yes Yes
RDM Enabled Optional Optional Optional Optional
Wireless DMX512 Input Optional N/A Optional N/A
Wireless/Cable DMX512 auto-
switching mode
Yes N/A Yes N/A
Galvanic Isolation barrier (Volts) 1500 1500 1500 1500
Short Circuit Protected Yes Yes Yes Yes
EMI Filtered Outputs Yes Yes Yes Yes
Universal Input Power Supply
(VAC)
85-264 85-264 85-264 85-264
Auto Frequency Input Selection
(Hz)
47-63 47-63 47-63 47-63
Power Supply On LED Yes Yes Yes Yes
19” Rack Mount Chassis Yes Yes No Yes
Conforms to CE regulations Yes Yes Yes Yes
Disclaimer
LSC Lighting Systems (Aust) Pty Ltd supplies the enclosed information in good faith. LSC Lighting Systems (Aust)
Pty Ltd makes no representations or warranties with respect to the contents or use of this manual and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose. Our policy is one of
continual improvement and we reserve the right to change circuitry, specifications or mode of operation of circuitry
without obligation to notify any person or entity of such revisions or changes.
Dimensions: MDRR(X/J) models 480mm(w) x 44mm(h) x 110mm(d)
18.9“ (w) x 1.73“ (h) x 4.33“ (d)
MDRT models 320mm(w) x 50mm(h) x 125mm(d)
12.6“ (w) x 1.97“ (h) x 4.92“ (d)
Weight:
MDRR(X) models packed (volumetric) 2.0kgs (4.5lbs)
MDRT models packed (volumetric) 2.0kgs (4.5lbs)
Construction:
MDRR(X/J) models All variants made from corrosion resistant steel
finished in black powdercoat with rear screened polycarbonate labels.
MDRT models Moulded housing made from tough ABS plastic
rated to UL94-V0 with rear screened polycarbonate labels.