Function descriptions, 1 turn on/off the visual presenter, 2 i would like to display a live image – Lumens Technology Ladibug PC 2.0 User Manual
Page 15: 3 i would like to capture images, 4 i would like to capture images continuously, 5 i would like to freeze the live image
14
7. Function Descriptions
7.1 Turn on/off the Visual Presenter
Click
to turn on/off the power.
<Note> When the machine is turned on, the light will flash. After shutdown, you
cannot restart it before the light finishes flashing.
7.2 I would like to display a live image
Click
to display the live image.
7.3 I would like to capture images
Click
to capture images.
[Note] The captured images will be displayed in the Thumbnail area.
7.4 I would like to capture images continuously
Click
to open burst mode setting. Click [OK] after setting.
<Note> Refer to
6.7 Time Lapse
for more information about Time Lapse setting.
<Note> The captured images will be displayed in the Thumbnail area.
7.5 I would like to freeze the live image
Click
to freeze the live image of Ladibug™.
Click
once again to lift the freeze.