Luxi Electronics DIY-30BS10 - Manual (Page 6)

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual ribbon wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489, 8507796 issued; others issued or pending in multiple countries
Step 3, final assembling
3.1 Pre-clip the top and bottom wire holders
onto the connector core; you may have to
twist one ribbon as much as 180 degree to
make it facing the right way; this is normal
3.2 Insert the connector core with both wire
holders all the way into No. 2 hole of the
hand tool and perform crimp
3.3 Slide the connector core into the top metal shell,
push up with your thumbnail until you hear or feel
a click
3.4 Place the bottom metal shell onto the top metal
shell, line up the 4 notches, push together until
you hear or feel clicks
3.5 Use the finger tips to gently bend the strain relief
tabs inward; be careful not to be cut