Luxi Electronics DIY-30BS10 - Manual (Page 7)

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual ribbon wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489, 8507796 issued; others issued or pending in multiple countries
3.6 Use the hand tool’s No. 3 dies to crimp the
strain relief tabs onto the cable jacket with
ground wires; make sure it’s a tight crimp
3.7 Trim off the excessive drain wires
3.8 Place the metal shells into the bottom
clamshell
3.9 Place the top clamshell onto the bottom clamshell
and press them together until you hear or feel
clicks
3.10
Peel of the plastic protection skin from the
clamshells
Congratulations! You’ve just made a beautiful HDMI
termination!