Lynx Studio Aurora 16 - Manual (Page 5)

Page 3
1.4 In the Box
The following items are included in your Aurora carton:
¾
Aurora Rack-Mount Converter
¾ AC Power Cord
¾ Aurora QuickStart Guide
¾ Aurora User’s Manual
¾ Warranty registration card
If any items are missing or damaged, please contact your dealer or Lynx at http://www.lynxstudio.com.
1.5 Power and Safety Information
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Do not block any of
the ventilation openings. Do not defeat the safety purpose of the grounding-type plug. A grounding
type plug has two blades and a third grounding prong. The third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet. Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
receptacles, and the point where they connect to the Aurora. Unplug this device during lightning
storms or when unused for long periods of time.
Please note that the Aurora comes factory-configured for a specific
voltage range, and cannot be changed in the field. The acceptable
voltage range of the Aurora is printed on the label affixed to the top
cover of the Aurora just above the AC power inlet. Failure to connect
the Aurora to an AC power source that conforms to the requirements
printed on the label may damage the Aurora and require it to be
returned to the factory for non-warranty repair.
1.6 Rack-Mounting
The Aurora is able be mounted in standard studio equipment racks. Please note that high performance,
high resolution AD and DA converters generate substantial heat.
For optimal performance and product longevity, it is necessary to leave
an empty rack space above and below the Aurora.
1.7 Operation Requirements
The Aurora was designed to operate seamlessly with industry-standard components. Control
requirements pertain to use of external remote control software - disregard if you will be controlling
the Aurora from its front panel controls only.
1.7.1 Input/Output
The Aurora supports AES/EBU for the digital inputs and outputs, and can be used with any AES/EBU
device that supports standard sample rates between 44.1kHz and 192 kHz in single-wire or dual-wire
mode. Please refer to Section 2.4 Cable Connections for more information about available cable sets.
ƽ
ƽ