Marantz NR1605 User Manual
Page 121
DTS sound mode
Sound mode type
Description
DTS Neo:6
This mode can be selected when the DTS Neo:6 decoder is used to play back 2-channel sources in 6.1/7.1-channel
surround sound including the surround back channel(s).
There are two playback modes: “Cinema” mode that is optimized for movie playback, “Music” mode that is optimized for
music playback.
DTS Surround
This mode can be selected when playing sources recorded in DTS.
DTS ES Dscrt6.1
z
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added using the discrete method is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
DTS ES Mtrx6.1
z
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit’s matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24
This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD
This mode can be selected when playing sources recorded in DTS-HD.
DTS Express
This mode can be selected when playing sources recorded in DTS Express.
z This can be selected when “Speaker Config.” - “Surr. Back” (v p. 188) is not set to “None”.
PCM multi-channel sound mode
Sound mode type
Description
Multi Ch In
This mode can be selected when playing multi-channel PCM/DSD sources.
121