Marantz AV9000 - Manual (Page 11)

ENGLISH
6
FRONT PANEL FEATURES (SEE
PAGE 3)
q POWER switch and STANDBY indicator
Press this button once to turn the unit on or off. In order to use the
remote control unit to turn the unit on the power switch must be
pressed once, and then the unit may be turned on or off via the
remote.
w PHONES jack for stereo headphones
Conventional dynamic headphones can be plugged in here.
Notes:
When the headphones plug is inserted, the surround mode is
switched automatically to
STEREO and the sound from the
speakers is muted.
The surround mode returns to the previous mode as soon as the
plug is removed from the jack.
e INFRARED SENSOR window
This window receives infrared signals from the remote control unit.
r A/D (Analog/Digital) SELECTOR button
In case that you select the input source which is linked with any digital
input, if you desire to switch to analog input temporarily, you can
switch by pressing A/D button.
Note:
This key is not effective for an input source which is not linked with
any digital input.
t AUTO MODE button
Press this button to select the auto surround mode.
y THX MODE button
Press this button to select the THX surround mode.
u SURROUND MODE SELECTOR ( up,
down) buttons
Press these buttons to set the desired surround mode in the following
sequence.
i BASS and TREBLE tone controls
These controls are used to boost or cut high and low frequencies.
TREBLE: Adjusts the tone of high-frequency sound.
BASS: Adjusts the tone of low-frequency sound.
Notes:
These buttons are unavailable in THX CINEMA mode.
The frequency is flat by pressing the up and down keys
simultaneously.
o DIGITAL AUDIO COPY button
Press this button for digital dubbing to the CD-R recorder or MD
deck.
When this button is pressed, the digital source of the DIGITAL
OUTPUT is switched in the following sequence.
!0 TAPE COPY button
Press this button for audio dubbing to the tape deck.
When this button is pressed, the source of the TAPE OUT is switched
in the following sequence.
!1 VCR1 COPY button
Press this button for video and audio dubbing to the VCR1 deck.
When this button is pressed, the source of the VCR1 OUT is switched
in the following sequence.
!2 AUX input jacks
These auxiliary video/audio input jacks accept the connection of a
camcorder, portable VCR, etc.
To make proper connections, refer to the owner’s manuals of the
auxiliary components.
!3 VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise
increases the sound level.
!4 AUTO TUNING button
When this button is pressed and the GYRO TUNING knob !6 is
turned quickly, the frequency is scanned while turning the GYRO
TUNING knob. The Auto scan function starts when the GYRO
TUNING knob is stopped.
!5 PRESET button
Press this button to display the preset number. The preset number is
changed by turning the
GYRO TUNING knob.
!6 GYRO TUNING knob
Turn this knob to change the frequency or the preset number. The
station name can be selected with this knob.
!7 CLEAR button
Press this button to cancel the station-memory setting mode or preset
scan tuning.
!8 MEMO (memory) button
Press this button to enter the tuner preset memory numbers and
station names.
!9 INPUT SELECTOR knob
When this knob is turned, the input signal is switched in the following
sequence.
SOURCE DIG.1 DIG.2 DIG.3 DIG.4 OFF
SOURCE TUNER CD CD-R/MD
SOURCE TV LD DVD DSS/VCR2 AUX
TUNER CD TAPE CD-R/MD TV
DSS/VCR2 VCR DVD AUX
AUTO STEREO DOLBY DTS CINEMA DTS MUSIC
MATRIX MOVIE HALL THX CINEMA MONO