Marantz CD5003 - Manual (Page 22)

19
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TIONS
ENGLISH
ADVANCED OPERATIONS –AUDIO CD–
3. Repeat step 2, and upon completion of the
programming, press the 7 button on the player
or remote control unit or press the PROGRAM
button on the remote control unit.
PHONES
+ -
LEVEL
The PROG indicator in the display stops
flashing and lights up instead, and the delete
program is entered. Up to 30 tracks can be
deleted from the program.
TEXT 1 3 5 7 9 11 13 15 17
TTL TTL TIME PROG
Light up
4. Press the 3 button on the player or remote
control unit. The CD is now played but with the
deleted tracks skipped.
Note:
Delete programming in the text display mode
cannot be performed for tracks which have no
text information for their titles.
7 Checking the program or delete
program contents
During programming operation or program play,
press the SCROLL/RECALL button on the remote
control unit.
With program play, the programmed tracks are
displayed one after the other in sequence on the
main display.
With delete program play, the deleted tracks are
displayed one after the other in sequence on the
main display.
7 Changing the program or delete
program contents
Deleting tracks which were programmed
for program play
When the SCROLL/RECALL button on the remote
control unit is pressed during programming, the
programmed tracks are displayed one after the
other in sequence.
As soon as the track to be deleted from the program
has appeared, press the CANCEL button on the
remote control unit immediately. The number of the
deleted track is cleared from the music calendar on
the display.
Canceling the deletion of tracks which were
deleted for delete program play
When the SCROLL/RECALL button on the remote
control unit is pressed during delete programming,
the deleted tracks are displayed one after the other
in sequence.
As soon as the track whose deletion is to be canceled
has appeared, press the CANCEL button on the
remote control unit immediately. The number of the
track whose deletion was canceled is displayed in
the music calendar on the display.
7 Adding tracks to the program
Press the PROGRAM button on the remote control
unit during stop. The status of the PROG indicator
in the display changes from lighted to flashing, and
more tracks can be added to the program.
7 Returning program play to
normal play (canceling the entire
program)
PHONES
+ -
LEVEL
Press the 7 button on the player or remote control
unit twice during program play or once during stop.
The PROG indicator on the display goes off, and the
entire program is canceled.
DISPLAY OFF
MP3/WM
BY
Alternatively, a program can be canceled when the
disc tray is opened by pressing the
0 button on the
player or on the remote controller.
7 Precautions for program and
delete program play
• When using the numeric buttons to select tracks
1 to 9 on a CD with 10 or more tracks in total,
allow 1.5 seconds or so to elapse after the button
corresponding to the number of the previous
track was pressed before pressing the button
corresponding to the number of the next track.
• When using the numeric buttons to select track
10 or up on a CD with 10 or more tracks in
total, press the button corresponding to lower
digit within 1.5 seconds or so after the button
corresponding to the higher digit was pressed.
• When using the 4 and ¢ buttons for
programming, keep pressing one of these
buttons with less than half a second or so in
between until the number of the desired track is
displayed.
• If the total time for a program exceeds 99
minutes 59 seconds, the time display will appear
as “– – : – –”.
CD5003_U_01_ENG.indd 19 CD5003_U_01_ENG.indd 19 08.6.19 8:22:09 AM 08.6.19 8:22:09 AM