Recording (from internal cd-deck), English, Important – Marantz DR6050 User Manual
Page 14
9
ENGLISH
e
e
e
e
e
To start recording press
0
0
0
0
0
REC (4).
➔
The display shows the real remaining time for the se-
lected recording. High speed recording starts.
lights continuously.
•
To check the elapsed recording time, press
DISPLAY (72).
This can be done during recording.
•
Recording will stop automatically.
Note:
Copy prohibited tracks will be copied analog.
is displayed.
r
r
r
r
r
To stop recording manually, press
9
9
9
9
9
STOP (5, 24, 82).
➔
goes out and recording stops.
•
If
9
STOP (5, 24,82) was pressed within 3 seconds after
0
REC (4), no recording will take place.
•
After recording, the display shows
for several sec-
onds. The Total time indications can differ slightly. However,
no music information is lost.
Note:
- In this Recording mode, the Pause function is not operative.
Important:
If you want to play the recorded CD-R(W) disc on any regu-
lar CD player, it must first be finalized. (See FINALIZING/
UNFINALIZNG page 13).
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
RECORDING (FROM INTERNAL CD-DECK)
The numbers between parentheses refer to the fold-out.
MENU/
STORE
CANCEL/
DELETE
0
9
8
7
6
5
4
3
2
1
RANDOM
PROG.
REPEAT
SCAN
CD
CDR
ABC
DEF
GHI
JKL
MN
OPQ
RST
UVW
XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
Recordable
ReWritable
SOURCE
REC TYPE
CLOSE
OPEN/
CLOSE
OPEN/
ERASE
FINALIZE
POWER
ON/OFF
PLAY/PAUSE
STOP
REC
CDR
CD RECORDER DR6050
PLAY/PAUSE
STOP
CD
DJ MODE
EASY JOG
PUSH ENTER
CANCEL/DELETE
STORE/MENU
PHONES
STANDBY
w
e r
w
w
w
r
w
Double speed recording
Using internal CD player.
•
During double speed recording the sound is not audible.
q
q
q
q
q
Make sure that the recording disc is absolutely free of
scratches and dust particles.
w
w
w
w
w
To choose the type of recording, press
REC TYPE (11).
once: to select
if you wish to make a
fast recording of a disc or programmed tracks.
three times: to select
if you wish to make a
fast recording of a disc or programmed tracks
and to automatically finalize the recording.
Also see ‘FINALIZING CD-R & CD-RW’ discs
on page 17.
The
label starts blinking. After 3 seconds
the display shows the remaining CD-R(W) recording
time on the left and total time of source on the right.
(every 2 seconds
is displayed.)
Both selection indicators are lit.
•
Press
PROG (86) on the remote control to select one or
more tracks for recording (see PROGRAMMING):
-
rotate the
EASY JOG (19) key to the required track
number, then press
PUSH ENTER (19).
or:
-
directly select the track number via the
10-keypad (71)
on the remote control, then press
ENTER (79).