Marantz DR6050 - Manual (Page 15)

10
ENGLISH
RECORDING (FROM INTERNAL CD-DECK)
The numbers between parentheses refer to the fold-out.
MENU/
STORE CANCEL/
DELETE
0
9 8 7
6 5 4
3 2 1
RANDOM PROG. REPEAT SCAN
CD CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY SPACE SCROLL
FUNCTION
ENTER
Recordable ReWritable
SOURCE REC TYPE
CLOSE OPEN/ CLOSE OPEN/
ERASE FINALIZE
POWER ON/OFF PLAY/PAUSE STOP
REC CDR
CD RECORDER DR6050
PLAY/PAUSE STOP
CD DJ MODE
EASY JOG
PUSH ENTER
CANCEL/DELETE STORE/MENU
PHONES
STANDBY
w e r w
w
w
r
w
Note:
Copy prohibited tracks will be copied analog.
is displayed.
r r r r r To stop recording, press 9 9 9 9 9 STOP (5, 24, 82).
➔ goes out and recording stops.
• If
9
STOP (5, 24, 82) was pressed within 3 seconds after
0
REC (4), no recording will take place.
• After recording, the display shows for several sec-
onds. The Total time indications can differ slightly. However,
no music information is lost.
Note:
In this recording mode, the Pause function is not operative.
Important:
If you want to play the recorded CDR disc on any regular
CD player, it must first be finalized. (See FINALIZING/
UNFINALIZING page 13.)
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
Normal speed recording
Using the internal CD player.
During the normal speed recording, you can listen to the re-
cording while you are making it.
q q q q q Make sure that the recording disc is absolutely free of
scratches and dust particles.
w w w w w For recording, press REC TYPE (11) twice.
• The label starts blinking. After 3 seconds the
display shows the remaining CD-R(W) recording time on the
left and total time of source on the right. (every 2 seconds
is displayed) Both selection indicators
are lit.
• Press PROG (86) on the remote control to select one or
more tracks for recording (see PROGRAMMING page 21):
-
rotate the EASY JOG (19) key to the required track
number, then press PUSH ENTER (19).
or:
- directly select the track number via the 10-keypad (71)
on the remote control, then press ENTER (79).
e e e e e To start recording, press 0 0 0 0 0 REC (4).
➔ lights continuously and the selected track
or program is copied at normal speed. The recording
time left will appear.
• To check the elapsed recording time, press DISPLAY (72) on
the remote control. This can be done during recording.
• Recording will stop automatically.