Marantz DR6050 - Manual (Page 27)

22
ENGLISH
Recordable ReWritable
SOURCE REC TYPE
CLOSE OPEN/ CLOSE OPEN/
ERASE FINALIZE
POWER ON/OFF PLAY/PAUSE STOP
REC CDR
CD RECORDER DR6050
STOP
CD
STANDBY
w qwe w
Player does not react
• use the POWER ON/OFF (1) button on the front of the
Player to switch it off and back on
on display
• a power failure has occurred during recording the CD-
Recorder is attempting to repair the disc
• If then appears on the display, the disc
cannot be recorded further, and cannot be finalised. But
it can still be played on the CD-Recorder or another CD-
Recorder.
• on a CD-R(W) disc, the track being recorded is lost, but
further recording and finalisation can still be done
OTHER INFORMATIONS
Diagnostic Program
If the malfunction continues, perform the Diagnostic Program:
1 Switch the recorder off using the POWER ON/OFF (1).
2 Simultaneously press the
R
(18) and
Q
(16) and switch
the recorder back on using the POWER ON/OFF (1).
➔ The display will now indicate ‘ ’.
➔ After a few minutes, the message will change to
‘
’ or ‘ ’.
➔ If the message appears, your recorder is defec-
tive and needs to be repaired. Consult your supplier or
call the Marantz Consumer Line to find the nearest serv-
ice centre. The number of the Consumer Line can be
found in the guarantee booklet.
➔ If the ‘ ’ message appears, there is no clear
defect and the malfunction may be a result of misinter-
pretation of the user instructions, an inappropriate disc,
a mechanical defect or an incorrect connection. To
solve this problem, carefully read the user instructions
once again; you can also contact your supplier.
➔ If you cannot solve the problem, go to the nearest serv-
ice centre.
3 Switch off the recorder using the POWER ON/OFF (1) to
exit from the Diagnostic Program.