Assign source names menu, Selection description and operation – Directed Video HVM500 User Manual
Page 11
11
© 2001 Directed Electronics, Inc.
FM MODULATOR
■
Select to let the MCB1000 know an FM modulator is
connected.
■
FM MODULATOR - allows the universal remote to turn
the FM modulator on/off.
■
NO FM MODULATOR - FM modulator control is defeated.
■
This FM Modulator function only applies when the
RFM100 is connected.
ANTENNA TV
■
Select to choose Antenna or Cable input to TVM300.
■
Select ANTENNA TV when the TVA10 antenna is con-
nected to the TVM300.
■
Select CATV when using a cable TV connection to
the TVM300.
CATV STD
■
Choose between three types of cable TV setups.
WRITE TO SYSTEM
■
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
■
WRITING TO SYSTEM will be displayed.
■
WRITE SUCCESSFUL - Information entered successfully.
■
WRITE FAILED - Information not entered successfully.
ASSIGN SOURCE NAMES MENU
NOTE: In this menu use the monitor’s MODE button or the remote’s MENU button to toggle through the available
choices for source names.
SELECTION
DESCRIPTION AND OPERATION
SOURCE 1: AV1
Select to change the name of source 1 from the source
names list at the end of this section.
SOURCE 2: AV2
Select to change the name of source 2 from the source
names list at the end of this section.
SOURCE 3: AV3
Select to change the name of source 3 from the source
names list at the end of this section.
WRITE TO SYSTEM
■
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
■
WRITING TO SYSTEM will be displayed.
■
WRITE SUCCESSFUL - Information entered successfully.
■
WRITE FAILED - Information not entered successfully.