Assign trigger names menu, Source names, Trigger names – Directed Video HVM500 User Manual
Page 12
12
© 2001 Directed Electronics, Inc.
ASSIGN TRIGGER NAMES MENU
NOTE: In this menu use the monitor’s MODE button or the remote’s MENU button to toggle through the available
choices for zone names.
SELECTION
DESCRIPTION AND OPERATION
ZONE 1
Select to change the name of zone 1 from the zone names
list at the end of this section.
ZONE 2
Shock sensor - Can not be changed.
ZONE 3
Door switch - Can not be changed.
ZONE 4
Select to change the name of zone 4 from the zone names
list at the end of this section.
ZONE 5
Ignition - Can not be changed.
ZONE 6
Select to change the name of zone 6 from the zone names
list at the end of this section.
ZONE 7
Select to change the name of zone 7 from the zone names
list at the end of this section.
ZONE 8
Select to change the name of zone 8 from the zone names
list at the end of this section.
WRITE TO SYSTEM
■
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
■
WRITING TO SYSTEM will be displayed.
■
WRITE SUCCESSFUL - Information entered successfully.
■
WRITE FAILED - Information not entered successfully.
.
SOURCE NAMES
■
SOURCE X: VCR
■
SOURCE X: DVD
■
SOURCE X: GAME
■
SOURCE X: CAMERA
■
SOURCE X: REAR CAMERA
■
SOURCE X: AUX INPUT PANEL
TRIGGER NAMES
■
ZONE X: HOOD/TRUNK SWITCH
■
ZONE X: HOOD SWITCH
■
ZONE X: TRUNK SWITCH
■
ZONE X: FIELD SENSOR
■
ZONE X: MOTION/TILT SENSOR
■
ZONE X: GLASS BREAK SENSOR
■
ZONE X: SHOCK SENSOR 2