Directed Video HVM500 - Manual (Page 7)

7
© 2001 Directed Electronics, Inc.
MONITOR DESCRIPTION
1. Screen - TFT active matrix LCD screen.
2. Input jack - for audio/video source.
3. Power/Source button - press to turn the
monitor on/off or change video source.
■ Press to turn the monitor on.
■ Press for more than three seconds to
turn the monitor off.
■ Press for less than three seconds
when on to change the source.
4. Headphone jack - insert the headphone
plug to listen to audio.
5. IR remote input - for remote control
operation.
6. Up/down buttons - volume and picture
adjustment.
■ Default volume control.
■ Adjusts programming when MODE is
pressed.
7. Mode button - changes up/down buttons
functions.
8. Monitor Insert Cover
9. LED indicator light - when turned on the
light is blue; when on standby the light is
red.
VIEWING ANGLE
The picture viewing angle can be easily adjust-
ed by pressing against the top or bottom of the
monitor bezel.
MAINTENANCE
Keep the monitor clean and free of dust and
moisture and it will provide years of trouble-free
operation. Do not allow any cleaning fluids on
the monitor screen or bezel; they may contain
chemicals that can harm the finish and diminish
the picture quality.
To clean the monitor, simply use a soft, dry
cloth and gently wipe away any dirt. Avoid
applying too much pressure to the screen when
cleaning as it can result in damage.
Basic Operation
4 7 9 6 5 2 3 1 6 8