Maytag MDG9800AWQ - Manual (Page 9)

8
Step 3 Step 4
Step 5 Step 6
Select the temperature. Choose the appropriate
temperature for drying the load. See page 6 for a
detailed description of these temperatures. Review Screen – The Review Screen lists the selected settings. At
this point you may press Start/Pause to begin drying the load or
select “options” for further customization of the drying cycle.
Options Screen – The option choices on the left
turn the options on or off. The option choices on the
right show an additional screen with multiple choices.
The following options may be added to customize
your “time dry” cycle:
• “wrinkle prevent”
• “damp dry chime”
• “remind chime”
• “end of cycle chime”
See page 7 for a detailed description of these options.
When the desired selections are made, touch
“continue” to see the review screen once again. Review Screen – The review screen will appear once again
to verify your selections. If they are correct, press
Start/Pause. If they are incorrect, press the area you would
like to change.
Special Note: As you use the touchscreen, if
you feel you are lost, press Back or Home.
S
ETTING
A
IR
F
LUFF
“air fluff ” tumbles the load with room temperature air.
Select “air fluff ” from the Home screen.
Step 1 Step 2
Use the up or down arrow to select the tumble time.
Select “options” if desired to select options for the load.
The review screen will appear once again to verify your
selections. If they are correct, press Start/Pause.