Maytag MAH6800AWW - Manual (Page 2)

Page 1
CABINET DIMENSIONS
PARTS supplied for installation:
Cable tie to secure drain hose to standpipe, inlet hose or laundry tub
2 washers and 2 screens for water hoses
• Multi wrench
• Utility knife
• Channel lock
• 5/16 nut driver
• Level
• Screw driver –
flatblade
READ THIS BEFORE YOU START…
Tools needed for installation:
1” min.
2.54 cm
27”
68.5 cm
27-1/2”
69.2 cm
22-1/4”
56.5 cm
3/8” min.
1 cm
43-1/4”
min.
109.8
cm
36-1/4”
min.
92.0
cm
ELECTRICAL
Refer to serial plate for specific
electrical requirements. For
more detailed information refer
to section on Electrical
Requirements.
WATER
Washer needs two standard
3/4 inch water supply faucets
with a pressure between
30–120 pounds per square inch.
For more detailed information
refer to section on Water
Requirements.