Maytag FAV6800AWQ - Manual (Page 6)

5
O
PERATING
I
NSTRUCTIONS
Step 5
Press the arrow pad to select the Spin speed.
Max Extract – Use for heavy loads such as towels and bedding.
Removes more water from loads during spin.
High/Flat Dry – Use for underwear, t-shirts and sturdy cottons or
for items that will be laid flat to dry.
Medium – Use for jeans, wrinkle-free or “wash-and-wear” items and
synthetics.
Low/Hang Dry – Use for delicate items needing a slow spin speed
because of fabric and construction and for hang-dry items.
S
ELECT
S
PIN
NOTE: To minimize wrinkling of wrinkle-free and no-iron fabrics, do not
use the Max Extract spin option for these loads. Do not use the Spin
Only cycle when cleaning bulky items. Do not overload the washer.
Step 6
Press the appropriate pad(s) to select one or more options.
Set Delay Time – Allows the start of any cycle to be delayed for up
to 9 hours. Make the appropriate selections for your load, then press
the up or down arrows to increase or decrease the delay time from
one to nine hours. Press the Start/Pause pad to start the delay time
countdown.To cancel a delay, press Off and reselect the cycle.
Presoak – Adds 12 minutes of mostly soaking with minimal tumbling
before the cycle. Can be selected with any cycle.
Extra Rinse – Adds an additional rinse at the end of the cycle to
more thoroughly remove laundry additives and perfumes.
Signal – Press the Signal pad to increase or decrease the end of
cycle signal volume.
S
ELECT
C
YCLE
O
PTIONS