Maytag MLI7000AAW - Manual (Page 4)

3
CONTROLS
Burst of Steam Button Steam Button
Off/Auto Off Light
Heating Light
Spray Button
Auto-shutoff
• Pressing this button will
discharge a powerful shot
of steam.
• The heating light illuminates
while the iron is preheating.
• Once the preset temperature is
reached, the light will turn off.
• When the iron is not on the
cradle, the heating light will
not be illuminated.
• If the heating light illuminates
when iron is returned to the
cradle, this indicates the iron
has dropped below the preset
temperature and needs to
heat.
• Leave button up for steam,
press down for a dry iron.
• Pressing this button will
discharge a mist of water from
the spray nozzle.
• This light will be illuminated upon
activation of the auto-shutoff
function. This prevents the iron
from accidentally remaining on
after usage.
• If the iron is left on the cradle with the power still on, it will automatically shut off after
approximately 10 minutes. The “Auto off” light will illuminate.
How does a cordless iron work?
• The iron rests on a cradle that supplies the power to heat the iron.
• Each time you set aside the iron to adjust a garment on the ironing board, the iron should
be placed back on the cradle. This will allow the iron to quickly “heat” so the temperature
of the iron remains at the desired level.