Maytag MBF1956HEB - Manual (Page 31)

Troubleshooting
30
PROBLEM
Refrigerator is
leaking water
Ice forms in inlet
tube to ice maker
POSSIBLE CAUSES
Plastic tubing was used to complete
water connection.
Improper water valve was installed.
Water pressure is low.
Freezer temperature is too high.
The manufacturer recommends using copper tubing
for installation. Plastic is less durable and can cause
leakage. The manufacturer is not responsible for
property damage due to improper installation or
water connection.
Check water connection (see page 10). Self-piercing
and
3 ⁄
16
” saddle valves cause low water pressure and
may clog the line over time. The manufacturer is not
responsible for property damage due to improper
installation or water connection.
Water pressure must be between 35 to 100 pounds
per square inch to function properly.
Adjust freezer control (see pages 11-14). Freezer is
recommended to be approximately 0° F (-18° C).
WHAT TO DO
Ice