Maytag MDB6657AWB - Manual (Page 5)

4
Removing the Upper
Rack
The upper rack can be removed when tall
or oversized items need to be loaded into
the lower rack.
TO REMOVE:
➢ Roll the upper rack 1/3 to 1/2 of the
way out.
➢ Remove the plastic rack stop from the
end of each track. To remove each
plastic rack stop, push inward
(towards the rack) on the ridged area
of the rack stop. The rack stop will
snap open and can be easily removed
by pulling straight out. Take care to
support the track while removing rack
stops.
➢ Roll the rack all the way out of the
track and remove from the dishwash-
er.
➢ Reverse the above procedure to
replace the upper rack into the dish-
washer.
Rack Stop
LO
ADI
NG