MBM Corporation AEROCUT G2 User Manual
Page 26
Advertising
25
③ Select the cutting pattern.
④ Cutting pattern content confirmation and partial correction
Press A through N to make corrections. O, P and Q are automatic calculations. It is
possible to enter in inches up to the 3rd decimal place.
Cutting pattern switching
Return to Paper
Selection Screen
Confirm cutting pattern and
move to Operation Screen
Move to Cutting Pattern
Confirmation Screen
Cutting Pattern
Selection Screen
Feed direction
The maximum paper weight for the
perforator is 65 lbs (Cover stock) [176 g/
㎡]. It is not to be used in combination with
the creaser.
Creasing can be performed up to six
times per piece. It is not to be used in
combination with the perforator
.
Advertising