MEGA Corp. MMP4-2 User Manual
Page 10
 
MMP 4-2
5 Nov 2011
SECTION 2
MMP-4 Overview
Contents
2-1
Description ……………………………… 2-1 
Inspection ……………………………..... 2-1 
Repair …………..............………….......... 2-2 
 
DESCRIPTION
The MEGA Mobile Pump is a towable water 
lifting station. The MMP 4 may be towed by a 
vehicle capable of at least a 6,000 pound (2,725 
kg) towing capacity, 1,000 pound (450 kg) 
tongue weight and equipped with the 
appropriate weight rated Class IV trailer hitch 
with a 2 5/16” ball. The MMP 4 can be 
transported to a water holding pond and be set 
up by 1 individual. MMP 4’s are a self 
contained pumping station fitted with a 
hydraulically driven 12” axial water pump that 
has the potential to lift water 25’ (7.62 meters) 
from pump level to fill water distribution 
equipment (maximum height, 17’ [5.2 meters] 
above ground level). MMP 4’s are equipped 
with: hydraulically lifted inlet and discharge 
booms with safety retaining chains and travel 
locking devices, DOT rated lighting, 16” load 
range ‘E’ on-highway trailer tires, a fold away 
hitch with safety chains, a vacuum break with 
an anti-siphon discharge sock on the discharge 
boom, 23 gallon (87 liter) hydraulic oil tank 
filled with Chevron Clarity AW 46 hydraulic 
oil, a gear type hydraulic pump driven by a 
Caterpillar 3054B series diesel engine and a 50 
gallon (190 liter) capacity diesel fuel tank 
equipped with shut off valves. 
 
 
 
 
 
 
 
 
 
 
 
 
 
The MMP 4 needs a minimum of 2.5’ (0.762 
meters) of water above the inlet of the water 
pump for proper operation. 
INSPECTION
1. Inspect MMP 4 exterior paint for damage
and corrosion. 
 
2. Inspect piping for damage and leaks. 
 
3. Inspect frame, landing gear and suspension 
for damage and missing parts.
4. Inspect engine assembly for loose, missing,
damaged or leaking parts.
 
5. Inspect all hydraulic hoses and couplings 
for security, damage and leaking.
 
6. Inspect fuel, engine oil, anti freeze and 
hydraulic oil for contamination and proper 
level. 
 
7. Inspect lighting, lug nuts, fenders and hitch
safety equipment for operation, damage and 
missing parts. 
 
8. Inspect electrical system for corrosion,
damage and missing parts.
REAR VIEW
TOP VIEW
SIDE VIEW