MEGA Corp. MMP4-2 User Manual
Page 8
MMP 4-2
5 Nov 2011
SECTION 1
Definitions and Abbreviations
1-5
High Pressure Motor (11)
This safety label is located on the hydraulic
motor.
Hydraulic motor and supply lines contain oil
under high pressure. Improper removal and
repair procedures could cause severe injury.
To remove or repair, instructions in the
Maintenance Manual must be followed.
Confined Space (12)
This safety label is located near water tank
access and fill ports.
Do not enter confined spaces without
following
established
site
specific
procedures. Failure to follow proper safety
procedures will result in serious injury or
death.
ABBREVIATIONS
BFV – Butterfly Valve
cc – Cubic Centimeters
CCW – Counter Clockwise
CW - Clockwise
fl. oz. – Fluid Ounce
FT - Feet
FPM – Feet Per Minute
GPM – Gallons Per Minute
IN/SQ FT – Inches per Square Feet
KM-H – Kilometers Per Hour
Kg – kilograms
Kpa - Kilopascals
l – liters
lpm – Liters per minute
LT – Left as viewed from the operators
position facing forward
m - meters
MPH – Miles Per Hour
MTT – Mega Truck Tank
Nm – Newton meters of torque
psi - pounds per square inch
RPM – Revolutions Per Minute
RT – Right as viewed from the operators
position facing forward
SQ FT – Square Feet
VDC – Volts, Direct Current