Measurement Computing DASYLab - Manual (Page 21)

DASYLab – Standard Driver 876994 Configuring DASYLab for PointScan 3-3
Set-up for Windows ¨ 9x
Use the below instructions to modify existing TCP/IP settings.
1. Select Start ⇒ Settings ⇒ Control Panel ⇒ Network
If TCP/IP does not exist in the components window Press Add ⇒ Protocol ⇒ TCP/IP.
2. Double Click on TCP/IP in the components window and select the IP Address tab.
3. Press OK to close the network dialog and reboot your computer if instructed to do so.
Win 9x: Example of Setting TCP/IP values