Measurement Computing ZonicBook Rev.3.0 - Manual (Page 18)

Getting Started, pg. 14 11-01-01 ZonicBook
Windows Me Users
Prior to installing the drivers, be sure that your ZonicBook system is
properly connected and powered.
1. Insert the DSP-card into your computer’s PCMCIA slot 0. Windows Me will start the
Hardware Wizard.
2. Verify that the “Specify the location of the driver” option is selected.
3. Click <Next>.
4. In the new dialog box, check “Specify a location.”
5. Click <Browse>.
6. Expand the CD-ROM drive node; then find and open the “Win95-98” folder.
Note: ZonicBook drivers for Windows Me are located in the “Win95-98” folder.
There is not a separate Me folder.