Metro medDISPENSE - Manual (Page 8)

Page 8 of 9
Add Medication to medDISPENSE Unit
 Sign on to the medDISPENSE unit.
 Select the Inventory Maintenance button.
 Select the Inventory Configuration button.
 Select the drawer in which the medication will be stored.
NOTE: To see which drawers are available, select Drawer in Use.
 Select the Add Item button.
 Search for the desired medication using the Generic, Brand, or Billnum search options.
 Select the medication and enter the quantity being added to the drawer.
 Confirm that you are adding medication to an open section by pressing <OK>.
 Press an open section name to select it and press <OK>.
 Enter the expiration month and year, then press <OK>.
 Enter a minimum and maximum quantity. (*These amounts should NEVER match.)
 Change the drawer security level if needed and press the <SAVE> button.
 Confirm the update by pressing YES.
 Repeat steps to add more medication if needed.
 Select Exit if additions to the drawer are complete.
 Select Exit again if you are finished with all inventory changes.
 If prompted, press YES to confirm that all drawers were closed.
Always remember to Sign Off the medDISPENSE system.