Metro Professional's Choice Wall Mounted Shelves - Manual (Page 4)

ATTACH POST ASSEMBLY TO WALL
BRACKETS 1. Attach post assembly
to top wall bracket.
Hold post assembly
between one top and bot-
tom set of wall brackets.
Align hole in top of post with
hole in top wall bracket.
Place a bolt through the top
wall bracket and into post
just enough to hold post in
place. Repeat for second
post.
2. Secure center sup-
port bracket to wall.
Align center support brack-
et with center anchors.
Angle post slightly and
secure each center sup-
port bracket to wall/anchors
with two supplied 2" bolts
and washers.
3. Secure post to bot-
tom wall bracket
and tighten all bolts.
Align hole in post with hole
in bottom wall bracket.
Place a bolt through the
bottom wall bracket and
into post to secure.
Repeat for second post.
Use an adjustable wrench
to tighten ALL four bolts
(top and bottom in both
posts).
4. Attach shelves.
Place shelf holes over top
hooks in shelf supports. If
necessary, use block of
wood and hammer to move
shelf support into proper
alignment.
5. Place hole plugs.
Firmly push a hole plug
into top of each shelf hole.
1 2
3
4
5
© 1999 InterMetro Industries Printed in U.S.A.
L01-351 10/99