Metro Starsys LA6 Full Feature Touchpad - Manual (Page 2)

Add New Supervisor Code:
Delete Existing Supervisor Code:
Edit Existing Supervisor Code:
- Press OK to wake up touch pad
- Enter Set Up Code & Press OK
- Press FUNCTION key until "Assign a New Manager ID" is
displayed & Press OK
- Enter New 4-digit Supervisor Code & Press OK
- Enter PIN number to coincide with new Supervisor Code or Press
OK to skip
- Press OK to verify new Supervisor Code / PIN number
- Enter Supervisor Name or Press OK to skip
- Press OK to verify Supervisor name
- Press SIGN OUT to exit Set Up Mode
- Press OK key to wake up touch pad
- Enter Set Up Code & Press OK
- Press FUNCTION key until "Delete a Manager ID" is displayed &
Press OK
- Enter Supervisor Code to be deleted & Press OK
- Press OK again
- Press SIGN OUT to exit Set Up Mode
Cannot change Supervisor Code itself but can Edit
information tied to Supervisor Code (i.e., PIN & Name)
- Press OK to wake up touch pad
- Enter Set Up Code & Press OK
- Press FUNCTION key until "Edit a Manager ID" is displayed &
Press OK
- Enter Supervisor Code to be edited & Press OK
- Press OK to Add/Change PIN number to coincide with Supervisor
Code or Press SELECT to skip
- Press OK to Add/Change Supervisor Name to coincide with
Supervisor Code or Press SELECT to skip
- Press OK to verify Supervisor name
- Press SIGN OUT to exit Set Up Mode.
Note:
- Enter PIN number to coincide with new User Code or Press OK to
skip - Press OK to verify new User Code / PIN number
- Press OK to verify User name
- "The Operator ID was Assigned" should display on screen
- Press OK to continue
- Press SIGN OUT to exit Supervisor Mode
Only the 4-digit User Code has to be entered to delete the
user; If User added PIN, it is not necessary for Supervisor to know
the PIN to Delete the User
- Press OK to wake up touch pad
- Enter Supervisor Code
- Press FUNCTION key until "Delete an Operator ID" is displayed &
Press OK
- Enter 4-digit User Code to be deleted & Press OK
- Press OK again to delete User Code
- Press SIGN OUT to exit Supervisor Mode
Cannot change User Code itself but can edit information tied
to User Code (i.e., PIN, Name, Card). To change User Code, must
Delete existing code & Add new code.
- Press OK key to wake up touch pad
- Enter Supervisor Code & Press OK
- Press FUNCTION key until "Edit an Operator ID" is displayed &
Press OK
- Enter the User Code to be edited
- Press OK to change the User PIN or Press SELECT to skip
- Press OK to change the current User Name or Press SELECT to
skip
- The Operator ID was updated will display on screen
- Press OK to continue
- Press SIGN OUT to exit Supervisor Mode
Only for a cart that is equipped with a card reader. This
function can be performed by the Supervisor or User.
- Press OK to wake up touch pad
- Enter Supervisor Code & Press OK
- Press FUNCTION key until "Assign a New Operator ID" is
displayed & Press OK
- Enter New 4-digit User Code & Press OK
- Card ID : Wave/Swipe Card & Press OK. Follow the on-screen instructions.
- Enter PIN number to coincide with new User Code or Press OK to
skip - Press OK to verify new User Code / PIN number
- Enter User Name or Press OK to skip
- Press OK to verify User name
- "The Operator ID was Assigned" should display on screen
- Press OK to continue
Press SIGN OUT to exit Supervisor Mode
Delete Existing User Code:
Edit Existing User Code:
Add New User Card:
Note:
Note:
Note:
Section 6: Supervisor Code Functions
Edit Existing Supervisor Code:
Add New User Code:
Note: Cannot change Supervisor Code itself but can Edit
information tied to Supervisor Code (i.e., PIN)
- Press OK to wake up touch pad
- Enter Supervisor Code & Press OK
- Press FUNCTION key until "Change the Manager PIN" is
displayed & Press OK
- Enter current PIN or Press OK if there is no current PIN
- Enter New PIN or Press OK to skip
- Press OK to accept new PIN
- Press SIGN OUT to exit Supervisor Mode
- Press OK to wake up touch pad
- Enter Supervisor Code & Press OK
- Press FUNCTION key until "Assign a New Operator ID" is
displayed & Press OK
- Enter New 4-digit User Code & Press OK.
Set Auto Lock Timer - Cart
The cart includes an adjustable time-out period controlled by a
motion sensor. While motion is sensed the time out is inactive.
When no motion is sensed the time-out countdown begins. Several
seconds before the time-out period elapses, an audible tone will
sound 5 times then the cart will automatically relock. Any motion (or
pressing any key) before the fifth tone will reset the time-out period.
The factory time-out default setting is 5 minutes.
2
Electronic Locking User Guide - General Operating Instructions
English
continued...
- If the cart has a Card reader, follow the instruction below:
Card ID: Wave/Swipe Card & Press OK. Follow the on screen
instructions to complete the card setup.
- Card ID: Wave/Swipe Card & Press OK. Follow the on screen
instructions to complete the card setup.
- Enter User Name or Press OK to skip
- Press OK to wake up touch pad
- Enter Service Code (911) and then press OK
- Press the FUNCTION key until “Configure Cart Bays” appears, press OK
- Use key 1, 2, 3, to select the active locking bays. Press OK
- Press OK to wake up touch pad
- Enter Service Code (911) and then press OK
- Press the FUNCTION key until “Configure Cart Bays” appears, press OK
- Use key 1, 2, 3, to select the active locking bays. Press OK
- Press OK to wake up touch pad
- Enter Service Code (911) and then press OK
- Press the FUNCTION key until “Configure Cart Bays” appears, press OK
- Use key 1, 2, 3, to select the active locking bays. Press OK