Product identification, Local codes, Unpacking – Desa BVDR18 User Manual

Page 4: Optional product features, Product identification local codes

Advertising
background image

www.desatech.com

901746-01E

4

Hearth Kit Model _____________________

Serial Number _______________________

Log Set Model _______________________

Figure 1 - Product Identification (BVDR24 Shown)

Grate

Burner Pan

Burner Manifold

Burner Clamp

Grate Steps

PRODUCT IDENTIFICATION

LOCAL CODES

Install and use log set with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code ANSI Z223.1/NFPA 54*
.
*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

UNPACkING

CAUTION: Do not remove

the data plates from the burner

pan. The data plates contain

important warranty and safety

information.

1. Remove logs, hearth kit, pan materials

and hardware from carton.

2. Remove all protective packaging applied

to logs and base for shipment.

3. Check heater for any shipping damage.

If heater is damaged call DESA Heating,
LLC at 1-866-672-6040 for replacement
parts before returning to dealer.

ON/OFF SAFETY VALVE/PILOT kIT
AND PROPANE/LP CONVERSION

An optional valve/safety pilot kit with a piezo
ignitor is available for this appliance. This sys-
tem requires no matches, batteries or other
sources to light. You must use this optional
system for LP conversion. See Accessories,
page 19.

REMOTE CONTROL READY
(MILLIvOLT) SAFETy vALvE/PILOT KIT

An optional millivolt valve/safety pilot kit with
a piezo ignitor is available for this appliance.
This system requires no matches, batteries
or other sources to light. This system may
be connected to a wall switch or hand-held
wireless remote control. See Accessories,
page 19.

REMOTE CONTROL ACCESSORIES

There is an optional hand-held ON/OFF re-
mote control that can be purchased separately
for this log set. You must use the millivolt
valve/safety pilot kit to use remote acces-
sories with this appliance. See Accessories,
page 19.
A wall switch is also available for this appli-
ance. You must use the millivolt valve/safety
pilot kit to use the wall switch with this appli-
ance. See Accessories, page 19.

OPTIONAL PRODUCT FEATURES

Advertising
This manual is related to the following products: