Microcom 48-466 - Manual (Page 29)

Chapter 3 Communications
48-466 Operators Manual 23
XB X BEGINNING COORDINATE
The X coordinate of the field is measured in dots. The far left edge of the label as viewed
from the front of the printer is X coordinate 1. There is no X coordinate 0. The X
coordinate increases in size from left to right (See Figure 9). An XB of 203 would place
the text one inch from the left side of the label.
YB Y BEGINNING COORDINATE
The Y coordinate of the field is measured in dots. A YB of 1 would be specified as the
first edge of the label coming out of the front of the printer during a label print. The Y
coordinate increases in size from the bottom to the top of the label (See Figure 9). A YB
of 203 would place text one inch from the bottom of the label.
CC CHARACTER COUNT
This parameter determines the number of characters that will be used in a field. If the
number of characters in the selected text string is more than the quantity specified by
CC, then the remainder of the text string is ignored. If the text string has less than the
number of characters specified by this parameter, then only those characters defined by
the text string are printed. For example, the text string - MICROCOM - would be 8
characters long. This parameter should be set to a value of 1 if the field is a graphic
image.