Microcom 48-466 User Manual
Page 78
Quick Reference Command Summary
Appendix A
48-466 Operators Manual
72
A
^D
COMMAND
26
Change SW6: Change software dip switch #6.
12345678
^ABxxxxxxxx
*******.
Not Used
******.)
Not Used
*****.))
Not Used
****.)))
Not Used
***.))))
Not Used
**.)))))
Not Used
*.))))))
Not Used
.)))))))
Always 0
29
Printer Statistics:
0
Print statistics to serial port
1
Print statistics on a label
2
Clear the printed labels variable in the statistics
3
Clear the printed inches variable in the statistics
30
Change Clock: Use the sequence below to set the time and date of the optional
real-time clock:
^D30 (return)
HH:MM:SS (return)
DD/MM/YY/W (return)
31
Show Clock: This command will send the date and time to the serial port.
32
Reset Machine: Restores printer to power-up settings. Also used to set the
EEPROM fields in memory. Section 5.3.
33
Display Model and Revision Number.
XX
35
Contrast Window Adjust: This is the temporary contrast adjustment. The ^AXX
is between 10 and 200%
XX
36
Adjust Contrast Base: Non-Volatile command. The ^AXX is between 10 and
200%. Section 5.3.
XX
37
Show Voltages: This command will send the values of the internal printer
voltages.
40
Clear Commands 41-51.
XX
41
Load number of fields in layout (HFM): Preceded by ^A.
XX
42
Load label width in dots (LXS): Preceded by ^A.
XX
43
Load label height in dots (LSY): Preceded by ^A.
XX
44
Load web size in dots (WEB): Preceded by ^A.