MicroLinks UM05 - user manual - Manual (Page 52)

Microscope Application Program http://www.ViTiny.com
52
Copyright © 2008-2012 MicroLinks Technology Corp.
Contacted Non-Contacted
Fig.5-34 Contacted and Non-Contacted
Based on the above steps it can measure horizontal and vertical scale. Several
examples as follows:
EX1: Measurement for non-contact object.
Use the “metal ruler” as a measurement base, the machine and the observation
object has distance, the focus of the video image is clear. Image shown in Fig.5-35
and Fig.5-36 is the result after measurement, horizontal and vertical scale range is
24.2mm and 18.1mm.
Fig.5-35 Horizontal scale range is
24.2mm
Fig.5-36 Vertical scale range is
18.1mm
EX2: Measurement for contacted object in low mag.
Use the “metal ruler” for measurement of the base, the machine and the
observation object of distance is close, the focus of the video image is clear.
Image shown in Fig.5-40 and Fig.5-41 is the result after measurement, horizontal
and vertical scale range is 5.60mm and 4.20mm.