MicroLinks UM05 - user manual - Manual (Page 56)

Microscope Application Program http://www.ViTiny.com
56
Copyright © 2008-2012 MicroLinks Technology Corp.
Fig.5-47 Setting scale dialog
 Scale default file
 Scale default file will depend on each model which has different default
setting. Such as: “Default Low Magnification” and “Default Height
Magnification” shown in Fig.5-48
Fig.5-48 Scale default File
When the microscope is observing object with contacted distance, it has two
focus points. Thus, it will have two kinds of scale value which are for low and
high mag. The default value is used for the fixed height, which means the
distance from device to object does not change. If the default value is not right for
the user, the scale value can reset or create a file for new value by calibrate the
horizontal and vertical scale according to the user’s preferences.
If want to return to the default file, check “Scale default” box than it will
return back to two default files and the other files will be deleted.
 Create a new scale file
Click “new” button than it will pop up shown in Fig.5-52 a dialog box and
input new scale name.