Microsens MS453490M Installation - Manual (Page 49)

– 49 –
A
T
ROUBLESHOOTING
D
IAGNOSING
S
WITCH
I
NDICATORS
Table 12: Troubleshooting Chart
Symptom Action
Power LED is Off ◆ Check connections between the switch, the power cord and
the wall outlet.
◆ Contact your dealer for assistance.
Power LED is on
Amber
◆ Contact your local dealer for assistance.
DIAG LED On Amber ◆ Power cycle the switch to try and clear the condition.
◆ If the condition does not clear, contact your dealer for
assistance.
Link LED is Off ◆ Verify that the switch and attached device are powered on.
◆ Be sure the cable is plugged into both the switch and
corresponding device.
◆ If the switch is installed in a rack, check the connections to
the punch-down block and patch panel.
◆ Verify that the proper cable type is used and its length does
not exceed specified limits.
◆ Check the adapter on the attached device and cable
connections for possible defects. Replace the defective
adapter or cable if necessary.