Microsens MS655102/12x - Manual (Page 11)

9
LED Indicators
There are few LED indicators located on the front panel, which display
the power status and network status of the Industrial switch. Each of
them has its own specific meaning as the table below.
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
Fault Red
On Power input 1 or 2 is inactive
Off
Power input 1 and 2 are both active, or no
power input
Link/Active
(1~5 for 1 x 100FX)
(1~6 for 2 x 100FX)
Green
On Connected to network
Flashing Networking is active
Off Not connected to network
Duplex/Collision
(1~4)
Orange
On Ethernet port full duplex
Flashing Collision of packets occurs
Off
Ethernet port half duplex or not connect to
network