Microsens MS655020X - Manual (Page 7)

Ethernet VDSL2 Extender - manual Page 7/9
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
Mounting Installation
DIN-Rail Mounting
The DIN-Rail is screwed on the unit when out of factory. If the DIN-Rail is not screwed
on the unit, please see the pictures and follow the steps below to screw the DIN-Rail on
the unit.
1. Use the screws to screw the DIN-Rail on the rear side of the unit.
2. To remove the DIN-Rail, reverse the step 1.
3. After the DIN-Rail is screwed on the rear side of the unit, insert the top of DIN-
Rail into the track.
4. Then, lightly push the DIN-Rail into the track.