Microsens MS655099 - Manual (Page 13)

9
LED Indicators
There are few LEDs display the power status and network status
located on the front panel of the Industrial switch converter, each of
them has its own specific meaning as below table.
Table 2.1: Industrial Switch Converter LED Definition
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
Fault Red
On Power input 1 or 2 has failed
Off
Power input 1 and 2 are both functional,
or no power input
LNK/ACT
(fiber port)
Green
On Connected to network
Flashing Networking is active
Off Not connected to network
1000M
(RJ-45)
Yellow
On Link to 1000M bps network
Off
Not connected to network or not working
at speed of 1000M
LNK/ACT
(RJ-45)
Green
On Connected to network
Flashing Networking is active
Off Not connected to network