Microsens MS400930 - Manual (Page 7)

5
Technical Specification
The following table provides the technical specification of the Power over
Ethernet Injector.
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab Gigabit Ethernet
IEEE802.2af Power over Ethernet
Connector DC out: Power pin: 1,2(V+), 3,6(V-)
Network Cable
10BASE-T: 2-pair UTP/STP Cat.3, 4,5 cable
EIA/TIA-568 100-ohm (100m)
100BASE-TX: 2-pair UTP/STP Cat.5 cable
EIA/TIA-568 100-ohm (100m)
1000Base-T: 4-pair UTP/STP Cat. 5e cable
EIA/TIA-568 100-ohm (100m)
LED Feeding Power (green)
Power Input 100~240V, 50~60Hz, 0.3A
Feeding Power 15.4Watts (48V
DC
)
Operating
environment
0 ℃~ 40 ℃
Operating
Humidity
10% ~ 90% Humidity (non-condensing)
Storage
Temperature
-40 ℃~ 70 ℃
Dimension 117mm x 60mm x 35mm (W x D x H)
EMI & Safety CE, CE/EN60950-1