Microsens MS400941 - Manual (Page 5)

3
Hardware Description
The Power over Ethernet Splitter has three connection ports, one LED
indicator, and DIP switch for voltage adjust. We will describe each part as
follows.
 Data In port: It is an RJ-45 Ethernet interface port for data transmit
into the PoE Splitter. It is for connecting with PoE injector or PoE
switch.
The Data In port figure
 Data Out port: It is an RJ-45 Ethernet port and has a fix RJ-45 cable
to connect with the network to PD.
 Power Out port: It supports two types of power cable—5.5 x 2.0mm
and 5.5 x 2.5mm. These two types of DC power jack are contained in
package. The Power Out port is for transmitting the power to the PD.
Data Out and Power Out port figure
 LED indicator: one Power LED indictor for the system unit. It locates
on the topside of the Power over Ethernet Splitter.
System power LED indicator