MMD Equipment 400S-6B1 - Manual (Page 11)

1.Safety
1-8
Adjusting tension of fan belt
Be sure to stop the engine and remove the starter key
whenever the tension of the fan belt is to be adjusted.
Remove the negative (–) side cable from the battery.
If the machine is running, it might catch the operator’s hand
into the fan belts, and this could cause a serious injury.
TR0304
Hands off from cooling fan
Be sure to stop the engine and remove the starter key
whenever check or maintenance work is carried out near the
cooling fan.
If the cooling fan is rotating, it may catch the operator or part of
his body into the fan, and it could cause a serious injury.
W009
Cleaning by air-blow
When cleaning dust accumulated in such devices as the
air-filter, by blowing compressed air, wear safety glasses, etc.
to protect your eyes.
M003
Lighting apparatus
It is recommended to use a lamp with safety guard fitted where
the site is dark.
Operating the machine gropingly or by relying on one’s intuition
could cause unexpected accidents.
Any lamps without safety guard are not recommended since
they can be broken and they could ignite flammables such as
fuel, etc. TR0206