Dish Network DuoDVR ViP 622 - Manual (Page 22)

Satellite Receiver
15
Dual and Single Modes
Switching Between Dual and Single Mode
Put the satellite receiver in Single or Dual Mode by pressing the front panel MODE button.
Keep the following items in mind when switching the satellite receiver between Dual and
Single Mode:
Note: If someone is using the TV2 outputs in Dual Mode, you will see a popup on the
nearby TV warning you that you are about to disrupt the use of the TV2 outputs.
Dual Mode Single Mode
Indications
Dual Mode front panel
indicator lights.
Single Mode front panel
indicator lights.
Recording
The Recording front panel
indicator lights to show
whether TV1, TV2, or both
are currently recording.
The TV1 Recording front
panel indicator lights when
you are recording from one
or both tuners.
Favorites
Lists
Favorites Lists set up for
both outputs (TV1 and TV2)
are available.
Only Favorites Lists set up
for TV1 are available. The
lists for TV2 are not lost,
they are simply unavailable
in Single Mode.
Locks
Locks set up for both outputs
(TV1 and TV2) are available.
Locks set up for only TV1
are available. The locks for
TV2 are not lost, they are
simply unavailable in Single
Mode.
Chapter 2 Two Color.fm Page 15 Tuesday, December 20, 2005 2:22 PM