Dish Network DuoDVR ViP 622 - Manual (Page 88)

Remote Controls
81
Controlling Other Components
Switching Between TV and Device Volume Control
When you set up the remote to control a TV, the mute and volume buttons control the TV
volume. However, if you want to use the AUX mode to control a tuner or amplifier and the
device has a volume setting, you can set up the remote to control the device’s volume
instead of the TV volume. Be sure to set up the remote to control a device in AUX mode
before using this feature.
To set the remote to control the device’s volume:
To set the remote back to control the TV volume :
Programming to Control a Second Satellite Receiver
If you have another DISH Network satellite receiver installed, you can use this remote in
AUX mode to control it along with your new receiver. When you program the remote to
control this other receiver, the remote will send out IR and UHF (not UHF Pro) signals to
the receiver. You can program the remote to control any other DISH Network satellite
receiver, except for following:
• TV2 on DISH 322, ViP222, ViP622 DVR, DISH Player-DVR 522, 625 and 942
• DishPlayer 7100/7200
Chapter 10 Two Color.fm Page 81 Tuesday, December 20, 2005 12:24 PM