Nevion EDFA-B-C 17dBm - Manual (Page 8)

EDFA-B-C 17dBm Rev. B
nevion.com | 8
4.2
Status by LED’s
The status of the module can be easily monitored visually by the LEDs at the front of the
module. The LEDs are visible through the front panel as shown below.
Figure 2: Panel indicator overview (Text not printed on the front panel)
4.2.1 LED status description
The functions of the different LEDs are described in table below.
Diode \ state Red LED Yellow LED Green LED No light
Status Module is faulty
Module is OK
Module has power Module has
no power
TEMP Laser
temperature
alarm Ambient
temperature alarm Temperature is OK
LOS & LOP Loss of input
signal Loss out output
signal
(mute/bypass) Signal is OK
LASER Laser fail Laser disabled
(mute/bypass) Laser is OK.
Status
TEMP
LOS & LOP
LASER