Nevion 3GHD-EO-2-SFP - Manual (Page 12)

3GHD-EO-2-SFP Rev. B
nevion.com | 12
4
Operation
4.1 Module status
The status of the module can be monitored in three ways.
1. GYDA System Controller (optional).
2. GPI at the rear of the sub-rack.
3.
LED’s at the front of the sub-rack.
Of these three, the GPI and the LED’s are mounted on the module itself, whereas the GYDA
System Controller is a separate module giving detailed information on the card status.
4.1.1 Multicon Gyda status interface
Figure 11 Dual converter status tab
The on-board temperature measurement is a feature used for monitoring
variations in temperature over time and can be accessed thru SNMP. The
absolute value of the temperature measurement has little value of its own as it
does not reflect the temperature inside the electronics nor the ambient frame
temperature.