Nevion AAV-HD-XMUX User Manual

Page 9

Advertising
background image

AAV-HD-XMUX(-T/R)/ AAV-SD-XMUX(-T/R)

Rev. G


nevion.com | 9

Return loss:

>15dB up to 1,5GHz.

Signal level:

nom. 800mV.

Connector:

BNC.

2.4.2 Optical video input

Optical wavelength:

1200-1620nm ±40 nm.

Maximum Optical power:

0 dBm HD PIN.

Minimum Optical power HD/ SD:

-22/-26 dBm with HD PIN.

Return loss:

Better than 27 dB.

Maximum reflected power:

4%.

Transmission circuit fiber:

Single mode HD PIN/ (Multi-mode option on request);
Multi-mode PIN is standard with AAV-SD-XMUX.

Connector:

SC/UPC.

2.4.3 Analog audio inputs

Number of inputs:

4.

Sampling frequency:

48 kHz.

Differential input impedance:

24 kohm.

Common mode input impedance:

50 kohm.

Connector (C1 backplanes):

DB-25F (Female with UNC threads).

Maximum signal level (0 dBFS):

+12, +13.5, +15, +16.7, +18, +20, +21 or +24dBu.

Level precision:

+/- 0.1dB where Zsource < 40 ohm.

Common mode voltage tolerance:

+/- 30V

– (Maximum peak signal level).

Frequency response:

20 Hz

– 20 kHz 0.1 dB.

Pass-band ripple:

+/- 0.005 dB.

Stop band attenuation:

80 dB.

Dynamic range

1

:

Min. 103 dB (A), typical 107 dB (A).

THD+N @ -1 dBFS:

Max. -90 dB, typical -96 dB.

Intermodulation distortion

2

:

Max. -90 dB, typical -95 dB.

Crosstalk:

Max. -90 dB, typical -99 dB.

CMRR (20 Hz

– 15 kHz):

Max. 70 dB @ 15 kHz, typical -90 dB @ low
frequencies.

2.4.4 Digital Audio Inputs

Number of AES3 inputs:

2.

Audio data rate:

30 kHz to 200 kHz, converted to 48 kHz if not 48 kHz
and isochronous to the video input signal.

Input impedance:

110 ohms transformer balanced.

Connector (C1 backplanes):

DB-25F (Female with UNC threads).

Embedded audio word length:

20 or 24 bits.

Embedded audio Channel Status:

As received when isochronous, otherwise fixed.

Sample rate converter dynamic
range:

139 dB (A) @ 1kHz.

2.4.5 Data inputs

RS422:

1.

Connector:

8P8C Modular jack.

UART mode:

Baud rates:

9600 to 115200.

Data length:

7 or 8 bits.

Parity:

None, odd or even.

Stop bits:

1, 1.5 or 2 bits.

1

|THD+N of -60 dBFS 1 kHz signal| + 60.

2

Signal at -12 dBFS, SMPTE 4:1 60 Hz + 7 kHz.

Advertising
This manual is related to the following products: