Nevion ADC-AES - Manual (Page 8)

ADC-AES Rev. F
nevion.com | 8
5 Specifications
5.1 Measurement conditions
Sampling rate 48 kHz
Ambient temperature 25

C
Measurement bandwidth 20 Hz – 20 kHz
Detector RMS
Input overload level (0 dBFS) + 24 dBu
5.2 Analogue inputs
Number of inputs 4 electronically balanced
Common mode voltage tolerance

30 V
Input impedance (differential) 25 k

Frequency response 10 Hz
– 21.5 kHz +0 dB , -1 dB
Passband ripple

0.001 dB
Group delay 65 samples
Stopband attenuation 110 dB
Dynamic range 1 Min. 112 dB(A) (0 dBFS @ +15 dBu)
Typ. 117 dB(A)
THD+N @ -1 dB FS Max. –95 dB
Typ. –102 dB
Intermodulation distortion 2 @ - 12 dB FS Max. –85 dB
Typ. –104 dB
Crosstalk Max. –100 dB
Typ. –110 dB
CMRR (0 Hz – 8 kHz) Min. 70 dB
Typ. 80 dB
5.3 Digital outputs
Internal sampling rates 44.1, 48, 88.2 and 96 kHz
Intrinsic jitter 200 ps peak-peak
JTF corner frequency 2 Hz
JTF peaking 0 dB
5.3.1 ADC-AES-C1 backplane
Number of outputs 2 * 2 transformer balanced
Format AES3-1992
Output impedance 110

1 |(THD+N of –60 dB FS signal)| + 60
2 SMTE 4:1 60 Hz + 7 kHz